1
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]
DC Motor RF Wireless Remote Control Kit / Transmitter & Receiver
This is a DC motor wireless controller. This controller can remote control one DC motor (DC12V~30V) rotates in positive / reversal direction. It is
adjustable about the speed of motor rotation. You can connect two restrictive switches to controller and use them to stop motor rotation. You can
also connect Optoelectronic switch, Proximity switches, or Hall switches to controller and use them to stop motor rotation. The receiver has function
of signal input, which means you can connect one external device to controller and use this device to start motor rotate in positive or reversal
direction.
Package Include:
1 x Receiver: S1FB-DC12/24
1 x Transmitter: CP-6
1 x User manual
Feature:
Wireless control, easy to install.
Control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals
with voltage DC12V~30V.
You can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance,
the wireless signal can pass through walls, floors and doors.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use a 6-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1FB-DC12/24
Power Supply (Operating Voltage): DC12V~30V
The Maximum Instantaneous Current of Starting Motor: 30A
Internal fuse: 30A
Maximum Rated Power for Brushed DC motors: 200 W for DC12V motor; 400W for DC 24Vmotor
Case Size: 160mm x 100mm x 42mm
Work with Fixed code transmitters
Transmitter:
Model No.: CP-6
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by soldering
Unit size: 85mm x 36mm x 16mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
Power supply:
Connect power supply DC 12V~30V to the terminals
“Input”. Connect DC motor to the terminals “Output”. You can exchange the output
wires of motor to change the rotating direction of motor.
Function of transmitter:
Connect power supply, the two LED flashes slowly. When the motor stop rotating, LED (D3) flashes once per second.
Press button 1: LED (D3) will on, LED (D4) will off, motor rotates in positive direction.
Press button 2: LED (D4) will on, LED (D3) will off, motor rotates in reversal direction.
Press button 3: Motor stop rotating, LED (D4) will off, LED (D3) flashes slowly.
Press button 4: Motor rotation will speed up.
Button 5 is useless.
Press button 6: Motor rotation will slow down.
Speed adjustment:
You can twist
“Adjustable potentiometer” to adjust the speed of motor rotates in positive / reversal direction. Twist clockwise, motor
rotation will speed up; Twist anti-clockwise, motor rotation will slow down.
Signal input:
Connect one external device with low voltage output signal to terminal
“Signal -“, “Signal input 1” and terminal “Signal -“ ,“Signal input 2”,
the external device
’s output signal can start motor rotate in positive or reversal direction.
Speed Adjustment
Adjustable potentiometer
