The XP1000L
mixer is Carvin’s new design to eliminate the plastic case and to offer more
efficient power amps with greater tonal quality. The 3 Class D power amps are 95% efficient
conserving power so they are more environmentally friendly allowing the use of small portable
generators.
SUPERB SOUND
is derived from the extremely low distortion, “high headroom” design.
State-of-the art, low noise, balanced XLR preamps from our Concert Series mixers provide
common mode rejection better than 78 dB, which means that any noise that may come over
your cables is virtually eliminated. Distortion is nearly non-existent with THD below 0.1% from
input to output, guaranteeing the purity of your sound. Hear the difference.
LIGHTWEIGHT and EASY TO USE
Controls are logically laid out making the XP
Series simple to use reducing errors during setup and performance. Its compact size and
weight of only 15 lbs. makes it the lightest, most powerful mixer in its class.
3 HIGH CURRENT “GREEN” CLASS-D AMPLIFIERS
produce total of 1200w
RMS, 1600w peak. Class D amps not only run cooler, but their power capabilities are out-
standing. The main L and R delivers 800w RMS (400w/400w) and the Monitor output deliv-
ers another 400w RMS - this kind of power maintains sonic purity while eliminating outboard
power amps. Speaker outputs accept either standard 1/4” or Speakon™ connectors for secure
connections with maximum power transfer to your speakers. Output meters and clip LED’s
give you a visual indicator for each amp.
HIGH CURRENT “GREEN” SWITCHMODE POWER SUPPLY
conserves power
by operating at higher efficiency. The DC voltage supply is recharged 100,000 times per sec-
ond, delivering continuous high current to the power amps.
2 INDEPENDENT 24-Bit STEREO DSP EFFECTS
allow you to assign each chan-
nel to your choice of effects. You can dedicate chorus/reverb to the acoustic guitar channel
and a lush reverb to the vocals, etc. Both effects are adjustable to your stage monitors so you
can hear yourself with full effects. The effects processors with 256 effects each include
reverbs, choruses, flanging and echoes with fully adjustable parameters for damping, decay,
depth, speed, regeneration and time.
ACTIVE 3 BAND CHANNEL EQ
provides easy adjustment for the tone you want. The
80Hz LO frequency control delivers a solid non-flabby bass. A simple adjustment with the MID
band control brings out the best sound for vocals or guitar by affecting the very important
750Hz frequency range. The 11.5k Hz HI treble control adds sparkle to your top-end without
adding harshness. Both the LO and HI controls are "shelving", which means they are effective
from 20Hz to 20kHz.
THREE 7-BAND EQUALIZERS
provide precise adjustments to fine tune your overall
sound and to help control feedback. A stereo (dual) graphic equalizer controls the main L and
R outputs and a mono equalizer controls the monitor output.
ENGINEERED TO LAST
Every XP Series mixer incorporates a rugged steel chassis with
protective side panels. Continuous full power is assured from high-grade 6063-T5-aluminum
heat sinks cooled by a variable speed fan. Sealed controls and switches guard against the out-
side elements while heavy-duty connectors provide a positive connection to your cables.
Hidden deep in the heart of these mixers is the “SMT” Surface Mount Technology that utilizes
surface mounted components to prevent parts from shaking or vibrating loose. Precision 1%
tolerances guarantee your settings will be accurate every time. Fire retardant FR-4 military
spec circuit cards feature double-sided copper to guard against noise and radio frequencies
(RF). The XP Series is made in the USA for years of dependable service!
THREE BAND
TONE
CONTROLS
PAD
HI
LOW
MIC
PRE
LEVEL
RIGHT
MON
EFF1
LEFT
SUMMING AMP
STEREO
GRAPHIC
EQUALIZER
MONITOR
CHANNELS 1-6
MONITOR
LEVEL and
SUMMING AMP
MID
LEFT
RIGHT
SUMMING AMP
MAIN R
BALANCED OUT
GRAPHIC
EQUALIZER
MONITOR
BALANCED OUT
TO INTERNAL
POWER AMP
MIC
LINE
PAN
TO INTERNAL
POWER AMPS
MAIN L
BALANCED OUT
EFFECTS
SUMMING AMP x 2
INTERNAL
DSP INPUTS
EXTERNAL
SEND
EFF 2 ONLY
STEREO
EFFECTS
TO MAIN
RETURNS FROM
INTERNAL DSP
EFFECTS TO
MONITOR
GAIN
TAPE OUT
L
R
TAPE OUT
LEVEL
MAIN
LEVEL
EFF
1/2
MUSIC
BREAK
SWITCH
TAPE IN
STEREO
THREE BAND
TONE
CONTROLS
HI
LOW
MIC
PRE
LEVEL
CHANNEL 9/10
MID
MIC
PAN
L
LINE
INPUTS
R
EFF
1/2
MON
STEREO
THREE BAND
TONE
CONTROLS
HI
LOW
MIC
PRE
LEVEL
CHANNEL 7/8
MID
MIC
PAN
L
LINE
INPUTS
R
EFF
1/2
MON
EFF2
12340 World Trade Drive, San Diego, CA 92128
www.carvin.com
76-88010 1009
MODEL XP1000L SPECIFICATIONS:
Frequency Response:
Mic or Line Inputs: 20Hz-20kHz ±1dB
Total Harmonic Distortion: Less than .1% at nominal levels
Equivalent Input Noise:
150 ohm source: -117dBu
Output Noise: -90dBu Master Line Out
(All Levels Minimum)
Output Headroom:
+20dB
Maximum Gain:
Mic in to Master Line Out: 70dB
Crosstalk:
Adjacent ch’s: -60db at 1KHz
Common Mode Rejection: -78db at 1KHz
Phantom Power:
48 volt @ XLR Mic channels
USB Power port:
5 volt, 200mA for LED lighting or MP3 charging
Channel EQ 3-band active:
LOW: 80Hz ±12dB
MID: 750Hz ±12dB
HI: 11.5KHz ±12dB
Power Output:
1200w (3x400w@4ohms)
Power Req.:
100-140VAC or 200-250VAC, 50-60Hz
Size and Weight:
10.3”H x 17”W x 10”D, 15 lbs
Remote Effects Controller:
Optional FS22 footswitch for effects on/off
Vinyl Cover:
CV1000
XP1000L BLOCK DIAGRAM
CARVIN ENGINEERING DATA
OPERATING MANUAL
XP1000L POWERED MIXER
RECEIVING INSPECTION—read before getting started
INSPECT YOUR MIXER FOR DAMAGE which may have occurred during shipping. If
damage is found, please notify the shipping company and CARVIN immediately.
SAVE THE CARTON & ALL PACKING MATERIALS. In the event you have to re-ship your
unit, always use the original carton and packing material. This will provide the best pos-
sible protection during shipment. CARVIN and the shipping company are not liable for
any damage caused by improper packing.
SAVE YOUR INVOICE. It will be required for warranty service if needed in the future.
SHIPMENT SHORTAGE. If you find items missing, they may have been shipped sep-
arately. Please allow several days for the rest of your order to arrive before inquiring.
RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this man-
ual for your records. Keep your portion of the card and return the portion with your
name and comments to us.
USA customers register online at: www.carvin.com/registration
All other countries register online at: www.carvinworld.com/registration
For your records, you may wish to record the following information.
Serial No._____________________ Invoice Date_______________
MADE IN THE USA
USB 5v Power
