background image

76-01800A   0902

CARVIN ENGINEERING DATA

SW1801 SUB WOOFER         

INSTRUCTIONS

MODEL SW1801 SUB WOOFER SPECS:

Frequency Response:

50 Hz to 450 Hz ±3 dB

Useable Low Frequency:

42 Hz (-10 dB)

Power Handling:

800 watts Continuous Power

Recommended Amp:

250 to 1000 watts

Sensitivity:

98 dB SPL, 1 watt @ 1 meter

Nominal Impedance:

4

Crossover Type:

Constant Voltage

Connectors input & output:

Two 1/4" & two Twist-Lok™ connectors 

Woofer Enclosure Type:

Vented Box

Enclosure Covering:

Duratuff II™

Dimensions:

24.75"W x 24"D x 34"H

Net Weight:

93 lbs.

Warranty:

One Year

Options:

Cover: 

CVS1801

12340 World Trade Drive, San Diego, CA  92128

(800) 854-2235

www.carvin.com

Congratulations on your selection of the SW1801 Sub Woofer

System.  The SW1801 is the finest single 18” sub-woofer enclosure
that Carvin has ever offered.    Perfect for bands, DJ’s, and
permanent installations.  From tight, punchy upper-bass to earth
shaking sub-bass, the SW1801 can fulfill any professional sound
reinforcement requirement easily.  The built-in sub woofer crossover
does an excellent job eliminating all upper frequencies (can be
switched out for bi-amping or tri-amping directly to the drivers).
Compatibility with any amp is assured with high current Twist-Lok™
twist-on connectors and standard 1/4” phone jacks. 

RECEIVING INSPECTION

INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during

shipping. If any damage is found, please notify the shipping company & CARVIN. 

SAVE THE CARTON & ALL PACKING MATERIALS.  In the event you have to re-ship

your unit, always use the original carton and packing material. This will provide the
best possible protection during shipment.  CARVIN and the shipping company are
not liable for any damage caused by improper packing.  

SAVE YOUR INVOICE.  It will be required for warranty service if needed in the

future. 

SHIPMENT SHORTAGE.  If you find items missing, they may have been shipped

separately.  Please allow several days for the rest of your order to arrive before
inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this

manual for your records.  Keep your portion of the card and return the portion with
your name and comments to us.

WARRANTY

Parts and labor are covered for 1 year on manufacturer’s defects. Warranty does

not cover burned out drivers caused by excessive power or distortion, or physical
damage caused by general use, moisture or dust.   CAUTION: Distortion from
power amps can destroy drivers much faster than clean power.  Contact Carvin’s
Customer Service at 800-854-2235 or [email protected]. Customer is
responsible for shipping charges.

For your records, you may wish to record the following information.

Serial No._____________________  Invoice Date_______________

SPEAKER CABLES

Use either 1/4” 16 gauge copper wire speaker cable or high-current Twist-Lok™

cables with heavy 4 conductor 12 gauge copper wire.  The Carvin PH50 is
adequate for lengths up to 50’ under normal use.  You can DAISY-CHAIN up to one
additional speaker per cable by using the OUTPUT connector.  Be sure to note the
total impedance to the amp so it is not lower than it’s recommended impedance. 

SUGGESTIONS FOR OPTIMAL PERFORMANCE

It is recommended to keep subwoofers on the floor as the floor enhances the

low frequency wave to develop more acoustic output.  Subwoofers may be hung
but their efficiency is slightly lower when suspended.

REAR CONNECT PLATE

Two standard 1/4” phone jacks and two Twist-Lok™ connectors are featured.  
See hookup diagrams for full range and biamp options.

SW1801

INTERNAL CROSSOVER

BYPASS

Serial No.

MADE

A

US

IN THE

xxxxxx

POWER RATING: 800 Watts

PRO SOUND REINFORCEMENT

IMPEDANCE: 4 Ohms

TWIST-LOK  

JACKS WIRED

IN PARALLEL

1+

1–

SIGNAL

GROUND

2+

2–

NOT USED

NOT USED

MIXER

POWER AMP

OUT

CROSSOVER SWITCH

: INTERNAL

ADDITIONAL

SYSTEM

SW1801

INTERNAL CROSSOVER

BYPASS

Serial No.

MADE

A

US

IN THE

xxxxxx

POWER RATING: 800 Watts

PRO SOUND REINFORCEMENT

IMPEDANCE: 4 Ohms

TWIST-LOK  

JACKS WIRED

IN PARALLEL

1+

1–

SIGNAL

GROUND

2+

2–

NOT USED

NOT USED

CROSSOVER SWITCH

: BYPASS

ELECTRONIC CROSSOVER

MIXER

OUT

IN

(Set FREQ 600Hz) 

HI

LO

SUB

MIXER

NORMAL FULL RANGE HOOKUP

BI-AMP HOOKUP

See other side for SPS™ Powered Speaker operation

SW1801

90

95

100

105

20  Hz

50

100

200

500

1K

2K

5K

10K

20K

dBSPL

SW1801 FREQUENCY RESPONSE

c

Отзывы: