background image

SPEAKER CABLES

The PH50 is our standard cable when purchasing a complete sound system.

These cables feature 1/4” plugs and heavy 16 gauge copper wire.  The PH50 is
adequate for lengths up to 50’ under normal use.  You can DAISY-CHAIN up to one
additional speaker per cable by using the unused 1/4” OUTPUT” jack (right side)
on your speaker jack plate.  Be sure to note the total impedance to the amp so it is
not lower than it’s recommended impedance.  See

Typical Loudspeaker Impedance

Configurations. 

PRECAUTIONS

1)  DO NOT EXCEED THE POWER RATING marked on the rear connect plate.

Excessive power will destroy drivers.  2)  DISTORTION from power amps will destroy
drivers much faster than clean power.  3)  WATER, MOISTURE, and DUST are
harmful to drivers causing failure which is not covered under warranty.  

WARRANTY

CARVIN loudspeakers are covered by a ONE year limited warranty unless

otherwise stated.  Warranty coverage is limited to original manufactures defects
only.  WARRANTY DOES NOT COVER: 1) Opened or burned voice coils.  2) Torn
cones caused by improper packing or abuse.  3) Damage from rain, moisture, ETC.
When returning defective driver(s), remove them from the enclosure to reduce
shipping costs .  DO NOT stuff paper into the driver(s).  Return pre-paid by UPS.
Include your address and description of the problem.  Your driver(s) will be returned
COD for the cost of shipping and reconditioning if not covered under warranty.

MODEL 832 SPEAKER SYSTEM SPECS:

Frequency Response:

65 Hz to 17 kHz ±3 dB

Useable Low Frequency:

42 Hz (-10 dB)

Power Handling:

400w Continuous Power

Recommended Amp:

50 to 600 watts

Sensitivity:

100 dB SPL, 1 Watt @ 1 meter

Coverage Angles:

90° Horizontal, 45° Vertical

Nominal Impedance:

8

Horn Driver Protection:

Yes

Inputs/Outputs:

Two SPEAKON™  & 1/4" Connectors

Woofer Enclosure Type:

Vented Box

Enclosure Covering:

Black Duratuff II™

Dim/Wt:

20"W x 14"D x 26"H, 47 lbs.

Warranty:

One Year

Options:

Cover: 

CVS832

, Stands: 

SS20 

or

SS30

832 FREQUENCY RESPONSE 

CARVIN ENGINEERING DATA

832 SPEAKER SYSTEM

INSTRUCTIONS

832

Congratulations on your selection of the 832 loudspeaker. The 832 is one of our

most popular because of its exceptional cost to performance value.  This 400 watt
system features a large 15” woofer that delivers great bottom end while the large
radial horn delivers crystal clear treble.  This is one of our most efficient speakers
for its size.  It’s great for indoor or outdoor performances, churches, schools or
clubs.  Use it with the optional TS30BN stand.  The 832 includes a built-in recessed
bracket for easy mounting to speaker stands.

RECEIVING INSPECTION

INSPECT YOUR SPEAKER FOR ANY DAMAGE which may have occurred during

shipping. If any damage is found, please notify the shipping company & CARVIN. 

SAVE THE CARTON & ALL PACKING MATERIALS.  In the event you have to re-ship

your unit, always use the original carton and packing material. This will provide the best
possible protection during shipment.  CARVIN and the shipping company are not liable
for any damage caused by improper packing.  

SAVE YOUR INVOICE.  It will be required for warranty service if needed in the future. 

SHIPMENT SHORTAGE.  If you find items missing, they may have been shipped

separately.  Please allow several days for the rest of your order to arrive before inquiring.

RECORD THE SERIAL NUMBER on the enclosed warranty card or below on this

manual for your records.  Keep your portion of the card and return the portion with your
name and comments to us.

SUGGESTIONS FOR OPTIMAL PERFORMANCE

Raise the enclosure to the ear level of your audience for greater coverage.  To

help control feedback, use a graphic equalizer.  Keep the speakers in front of the
microphone.  Never direct the microphone towards the speaker. For greater
coverage, add a second speaker system 20° to 30° off axis.

TYPICAL LOUDSPEAKER IMPEDANCE CONFIGURATIONS

Individual speaker or speaker cabinet wiring examples for total impedance.

For your records, you may wish to record the following information.

Serial No._____________________  Invoice Date_______________

SERIES CONNECTION

16

 TOTAL IMPEDANCE

+

+

+

PARALLEL CONNECTION

4

 TOTAL IMPEDANCE

+

+

+

 

8

 TOTAL

IMPEDANCE

SERIES/PARALLEL

CONNECTION

8

 TOTAL IMPEDANCE

+

+

+

+

+

+

+

8

8

8

8

8

8

8

4

8

8

16

8

8

REAR CONNECT PLATE

Two professional twist-lock SPEAKON™

connectors and two standard 1/4” phone
jacks are featured.  Use these connectors
for connecting to the power amp and daisy
chaining to an additional speakers. 

12340 World Trade Drive, San Diego, CA  92128

(619) 487-1600   (800) 854-2235

www.carvin.com

Отзывы: