manualshive.com logo in svg

Cartoni Malibu 540 2014, Руководство пользователя

Поделиться
Скачать
Cartoni Malibu 540 2014 Скачать руководство пользователя страница 15

1

1

110-0001-04EN

Information on documentation

Chapter Overview

This chapter contains important information and instructions for using your 

Malibu box-type van.

The information affects, in detail:

 • putting into operation
 •

vehicle-specific documents for the Malibu

 • general notes
 •

Warranty, guarantee and customer services

 • Environmental notes

1 

Information on documentation

1.1 

Before putting into operation

Before starting for the first time, read through this user manual com-

pletely!

Always keep the user manual in the Malibu box-type van. 

Hand over all safety guidelines, also to other users.

In the event of a change of ownership, these documents must also be hand

-

ed over.

1.2 

Malibu documents

You are handed over a folder along with your Malibu that contains the follow-

ing accompanying vehicle documents: 

 • user manual
 • service manual enclosed separately in the Annex
 • dealer register

1.3 

Additional documents

 •

Test certificate for liquid gas, with test sticker

 • Complete set of documents of the vehicle manufacturer
 • User manual for the liquid gas built-in cooker
 • User manual for the cassette toilet
 • User manual for the heater
 • User manual for the fridge
 • User manual for other special equipment facilities

This user manual contains sections where a description is made of the mod-

el-related equipment or special equipment (SA). The sections are not marked 

separately. The equipment of the Malibu box-type van may therefore deviate 

from many figures or descriptions. A description of the special equipment is 

then made if this is required. Observe the user manuals enclosed separately. 

If the instructions in this user manual are disregarded thus leading to damage 

to the Malibu box-type van, all claims for guarantee and warranty are ren

-

dered invalid.

Содержание Malibu 540 2014









































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды