TO REMOVE PHONE FROM ADAPTER:
To save your alignment, make no further adjustments to the top clamp and alignment
knob. Simply remove phone using right clamp only as shown in Fig.4.
USING ADAPTER AGAIN:
The alignment of your phone to the adapter should be saved from the initial setup,
so many steps can be skipped (Fig.1–2, 7–11) and only a quick fine adjustment of the
alignment may be needed.
Frequently Asked Questions:
Q1:
Why does the top clamp touch the round corner of my phone, instead of the top flat edge?
A1:
This is normal for some models of phones. Just fit as close to rounded edge as
possible and lock top clamp as normal.
Q2:
Why am I getting reflections and/or glare in my image?
A2:
This may occur with indoor lighting. Please avoid overhead lighting or change the angle
of the lighting relative to phone. Also, please use without flash to avoid reflections and/
or glare in photos. If there’s glare on your phone screen that makes image hard to view,
increase brightness setting on phone and view from a position with less overhead light.
11
