Carson FD Rapscallion, Инструкция по эксплуатации

Страница: 24 / 32

Gb
// 24
troubLeSHootIng
Problem cause Remedy
Model does not move Model has no contact with the water Make model into the water
Weak or no battery in the model Insert fully charged battery
The overheat cut-out has stopped the model due
to overheating
Switch off the receiver. Allow the RC model to
cool down for approximately 30 minutes
no control
Weak rechargeable battery/battery in transmitter
or model
Insert fully charged battery or new battery
the brushless motor suddenly
stops during normal operation.
The receiver is being affected by interference. Change location and start operation in another
area.
The functions of the speed controller have been
stopped by the integrated safety shut-off for low
battery voltage or overheating.
Replace the driving battery with a fully charged
battery or wait until the electronics have cooled
down.