Carrier TruVu TV-MPCXP1628-NR, Руководство по установке и запуску

Страница: 60 / 94

Adjusting the TV-MPCXP1628-NR driver properties
TruVu™ MPC Controller ( part no. TV-MPCXP1628-NR) CARRIER CORPORATION ©2021
Installation and Start-up Guide All rights reserved
54
Network Diagnostics - Packet Capture
This page allows you to capture network communication on a port and then download the capture file for
troubleshooting. Choose one of the following capture options:
•
Start/Stop - Define the start and stop criteria, and then click Start and Accept to begin the capture. When the
capture stops, the capture file is generated.
NOTE If a Start/Stop capture is running on any other port, the Get capture file button will be disabled until all
Start/Stop captures have completed.
○
Start capture: - When you check At (mm/dd/yyyy hh:mm AM/PM) , enter the time and date, and click
Start , the packet capture begins at the date and time you specified.
NOTE The hours field is validated from 0 to 12, and minute field is validated from 0 to 59.
○
Continuous - Click Start and Accept to begin the capture. Click Save to momentarily stop the capture and
create the capture file. The capture will automatically resume. Click on the Start/Stop option to end the
Continuous capture.
○
If the port is set up for MS/TP, select an option in the Capture section.