Carrier Transicold 69NT40-561-001, Руководство по эксплуатации и обслуживанию

Страница: 143 / 182

7–31 T-340
7.24.2 Sensor Replacement
1. Turn unit power OFF and disconnect power supply.
NOTE
Include white date code label when cutting out and removing defective sensors. The label could be required
for warranty returns.
2. Cut cable. Slide the cap and grommet off a bulb type sensor and save for reuse. Do not cut the grommet .
3. Cut one wire of existing cable 40 mm (1-1/2 inches) shorter than the other wire.
4. Cut replacement sensor wires (opposite colors) back 40 mm (1-1/2 inches) (see
Figure 7.17 .)
Table 7–4 Sensor Resistance - PrimeLINE CPDS
°C °F OHMS °C °F OHMS
-40 -40 2,889,600 18 64.4 117,656
-38 -36.4 2,532,872 20 68.0 107,439
-36 -32.8 2,225,078 22 71.6 98,194
-34 -29.2 1,957,446 24 75.2 89,916
-32 -25.6 1,724,386 25 77 86,113
-30 -22.0 1,522,200 26 78.8 82,310
-28 -18.4 1,345,074 28 82.4 75,473
-26 -14.8 1,190,945 30 83.0 69,281
-24 -11.2 1,056,140 32 89.6 63,648
-22 -7.6 938,045 34 93.2 58,531
-20 -4.0 834,716 36 96.8 53,887
-18 -0.4 743,581 38 100.4 49,656
-16 3.2 663,593 40 104.0 45,812
-14 6.8 593,030 42 107.6 42,294
-12 10.4 530,714 44 111.2 39,078
-10 14.0 475,743 46 114.8 36,145
-8 17.6 426,904 48 118.4 33,445
-6 21.2 383,706 50 122.0 30,985
-4 24.8 345,315 52 125.6 28,724
-2 28.4 311,165 54 129.2 26,651
0 32.0 280,824 56 132.8 27,750
2 35.6 253,682 58 136.4 23,005
4 39.2 229,499 60 140.0 21,396
6 42.8 207,870 62 143.6 19,909
8 46.4 188,494 64 147.2 18,550
10 50.0 171,165 66 150.8 17,294
12 53.6 155,574 68 154.4 16,133
14 57.2 141,590 70 158.0 15,067
16 60.8 129,000 72 161.6 14,078