manualshive.com logo in svg

Carrier Puron R-410A, Инструкции по обслуживанию и техническому обслуживанию, Страница: 59 / 84

Поделиться
Скачать
Carrier Puron R-410A Скачать руководство пользователя страница 59

59

APPENDIX C — FAN PERFORMANCE

General Fan Performance Notes

1. Interpolation is permissible. Do not extrapolate.

2. External static pressure is the static pressure difference

between the return duct and the supply duct plus the static
pressure caused by any FIOPs or accessories.

3. Tabular data accounts for pressure loss due to clean filters,

unit casing, and wet coils. Factory options and accessories
may add static pressure losses.

4. The Fan Performance tables offer motor/drive recommen-

dations. In cases when two motor/drive combinations
would work, Carrier recommended the lower horsepower

option.

5. For information on the electrical properties of Carrier’s

motors, please see the Electrical information section of

this book.

Boldface

 indicates field-supplied drive is required.

NOTES: 

1. For more information, see General Fan Performance Notes above.
2. Recommend using field-supplied fan pulley (part number

KR11AG006) and belt (part number KR30AE039) with field-sup-
plied drive.

3. Recommend using field-supplied motor pulley (part number

KR11HY161) and belt (part number KR30AE035) with field-sup-
plied drive.

Table C — 50KC**04 3 Ton Horizontal Supply (1 Phase) 

CFM

AVAILABLE EXTERNAL STATIC PRESSURE (in. wg)

0.2

0.4

0.6

0.8

1.0

RPM

BHP

RPM

BHP

RPM

BHP

RPM

BHP

RPM

BHP

  900

574

0.13

707

0.23

817

0.34

  913

0.47

  999

0.61

  975

597

0.15

727

0.25

835

0.37

  929

0.50

1015

0.64

1050

621

0.18

747

0.28

853

0.40

  946

0.53

1030

0.68

1125

646

0.20

768

0.31

872

0.43

  964

0.57

1047

0.72

1200

671

0.23

790

0.34

892

0.47

  982

0.61

1064

0.76

1275

696

0.26

812

0.38

912

0.51

1001

0.65

1082

0.81

1350

723

0.30

835

0.42

933

0.55

1020

0.70

1100

0.86

1425

749

0.34

859

0.46

955

0.60

1040

0.75

1119

0.91

1500

776

0.38

883

0.51

977

0.65

1061

0.80

1138

0.97

CFM

AVAILABLE EXTERNAL STATIC PRESSURE (in. wg)

1.2

1.4

1.6

1.8

2.0

RPM

BHP

RPM

BHP

RPM

BHP

RPM

BHP

RPM

BHP

  900

1078

0.77

1151

0.93

1220

1.11

1284

1.30

1346

1.49

  975

1093

0.80

1165

0.97

1233

1.15

1297

1.33

—

—

1050

1108

0.84

1180

1.01

1247

1.19

1311

1.38

—

—

1125

1123

0.88

1195

1.05

1261

1.23

1325

1.42

—

—

1200

1140

0.92

1210

1.10

1276

1.28

1339

1.47

—

—

1275

1157

0.97

1226

1.15

1292

1.33

—

—

—

—

1350

1174

1.02

1243

1.20

1308

1.39

—

—

—

—

1425

1192

1.08

1260

1.26

1325

1.45

—

—

—

—

1500

1210

1.14

1278

1.33

—

—

—

—

—

—

 Medium static 770-1175 RPM, 1.2 BHP max
 High static 1035-1466 RPM, 1.5 BHP max

Содержание Puron R-410A





















































































Отзывы:

Нет отзывов