Carrier Omnizone 50BVC Скачать руководство пользователя страница 67

Страница: 67 / 92

BACNET

Access: Home screen
Hotkey Access:

Handheld BACview: Fn + 5
Virtual BACview: Ctrl + 5
The BACnet screen (Fig. 75) allows the user to configure the unit

for a network connection.

Fig. 75 — BACnet Screen

Click the

[



Prev]

softkey to return to the Home screen. See

Table 58 for screen function information.

SET CURRENT TIME/DATE

Hotkey Access:

Handheld BACview: Fn + 2
Virtual BACview: Ctrl + 2
The Set Current Time/Date screen (see Fig. 76) allows the time

and date to be set.

Fig. 76 — Set Current Time/Date Screen

1. Move the bracket using the arrow keys to the hour, minute,

seconds, day, month or year values.

2. Press

ENTER

to change the value. The screen softkeys will

appear which will allow the value to be changed.

3. Click the

[



INCR]

[



DECR]

softkeys to change the

value.

4. To save the change click the

[



OK]

softkey. To cancel the

change, click the

[



CANCEL]

softkey.

DAYLIGHT SAVINGS TIME

Hotkey Access:

Handheld BACview: Fn + 3
Virtual BACview: Ctrl + 3
The Daylight Savings Time screen (see Fig. 77) allows the values

for daylight savings time to be changed. The start time (military)

and length (days) of the DST can be changed. Also, the start and

end times for DST can be changed.

Fig. 77 — Daylight Savings Time Screen

1. Move the bracket using the arrow keys to the value that needs

to be changed.

2. Press

ENTER

to change the value. The screen softkeys will

appear which will allow the value to be changed.

3. Click the

[



NCR]

[



DECR]

softkeys to change the

value.

4. To save the change click the

[



OK]

softkey. To cancel the

change, click the

[



CANCEL]

softkey.

BACNET INSTANCE AND ID

Hotkey Access:

BACview: Fn + 5
Virtual BACview: Ctrl + 5
The BACnet Instance and ID screen (see Fig. 78) allows the val-

ues for the device instance, device ID and the Autogenerate

Device ID to be changed.

Fig. 78 — BACnet Instance and ID Screen

1. Move the bracket using the arrow keys to the value that needs

to be changed.

2. Press

ENTER

to change the value. The screen softkeys will

appear which will allow the value to be changed.

3. Click the

[



INCR]

[



DECR]

softkeys to change the

value.

4. To save the change click the

[



OK]

softkey. To cancel the

change, click the

[



CANCEL]

softkey.

Table 58 — BACnet Screen Functions

FIELD / KEY

FUNCTION / INFORMATION

BACnet Device Instance
(adjustable)

Displays the existing device instance
number

Base BACnet Device ID
(adjustable)

Displays the existing base BACnet device
I.D.

Autogenerate Device ID?
(adjustable)

Displays the current setting for the auto-
generate device I.D.

Содержание Omnizone 50BVC





























































































Результаты поиска

Содержание Omnizone 50BVC

Отзывы:

Carrier Omnizone 50BVC, Установка, запуск, обслуживание, управление, эксплуатация и устранение неисправностей, Страница: 67 / 92

Результаты поиска

Содержание Omnizone 50BVC

Отзывы: