Carrier Graviner Mk7, Инструкция по установке, эксплуатации и обслуживанию

Страница: 101 / 154

March 2021 Page 90 of 143 59812-K007 Rev 17
Business Confidential
Figure 143 Detector Parameters
Peak Level The highest oil mist level indicated by the detector since the peak level
was reset.
Current Level The current oil mist level indicated by the detector.
Offset Digipot Value set during the production of the detector. The value is specific to
the detector.
Gain Digipot Value set during the production of the detector. The value is specific to
the detector.
Contamination Low
Limit This represents the lowest value for the contamination value before a
fault is indicated. Value set during the production of the detector. The
value is specific to the detector.
Original
Contamination Value This represents the contamination value measured when the detector
was produced, i.e. when the detector sample chamber was free of oil.
Current
Contamination Value The represents the current contamination value measured by the
detector.
Serial Number Shows the serial number of the detector.
Software Version Shows the version of the software programmed into the detector.
4.6 DETECTOR CLEANING
The Graviner OMD Detector is made of 2 assemblies, the Detector Head and the Detector Base. The
Detector Head is attached to the Detector Base with 2 Allen bolts.