9
NOTE:
The following is a typical installation of the air cleaner on a high boy
furnace. You may have to alter the installation to fit your specific
application.
5. Locate the cabinet in the cold air return duct so that all of the return
air flows through the unit. If the furnace and air cleaner openings are
different, use a transition (see Figure 2).
6. Mounting holes are provided for
simple connection to duct work.
The .140" holes are sized for #8
sheet metal screws, or 1/8" rivets. If
the adjoining duct work is flanged,
install the screws so that the screw
heads are inside the cabinet. This
will prevent damage to the filter
cartridge during removal and
installation (Figure 4).
7. Remove media filter cartridge from
plastic bag and replace media
filter in cabinet.
8. After the unit has been secured, seal seams air tight with duct tape
or caulking. Reinstall access door to ensure a tight seal.
