EVD4X, ESD4X, WMVC, WMSC: Installation Instructions
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
4
A200227B
Fig. 2 – Typical Flush-Fit Coil Installation on Furnace
(recommended)
A200228B
Fig. 3 – Adapter(s) Installation When Coil is Larger than Furnace
(recommended)
IMPORTANT:
Any installation configuration shown here that is noted
as ‘
not recommended
’ indicates that this configuration has not been
factory tested and therefore full performance specifications have not
been certified. In instances where a ‘not recommended’ installation
configuration is required, it is the responsibility of the installer to ensure
all performance criteria is met.
A221112
Fig. 4 – Smaller Furnace, Equal Overhang, Flush Mount
(not recommended)
A221113
Fig. 5 – Smaller Furnace, Offset, Flush Mount Right or Left
(not recommended)
(YDSRUDWRU
&RLO
6XSSO\
5HWXUQ
5HWXUQ
6XSSO\
Upflow
Downflow
Airflow
Ductwork
4” minimum
Airflow
Ductwork
4” minimum
Airflow
Ductwork
Airflow
Ductwork
Flush Mount
Equal Overhang
with block-off plates
Flush Mount
Offset Left or Right
with block-off plates
Airflow
Ductwork
Airflow
Ductwork