Carrier ERVXXSHA1130 Скачать руководство пользователя страница 1 | Manualshive

Страница: 1 / 18

Carrier ERVXXSHA1130 Скачать руководство пользователя страница 1

User and Installer Manual

A200557

INSTALLER: READ THESE INSTRUCTIONS BEFORE INSTALLING UNIT.

SAVE THEM FOR THE USER.

RESIDENTIAL USE ONLY

REGISTER YOUR PRODUCT ONLINE AT: www.cac-bdp-all.com

For additional information, https://www.hvacpartners.com/

A200637

65% SRE ERV Models are not ENERGY STAR certified

Consumer Information

A. To ensure quiet operation of the ENERGY STAR certified H/ERV, each product model must be installed using sound attenuation techniques

appropriate for the installation.
B. The way your heat/energy-recovery ventilator is installed can make a significant difference to the electrical energy you use. To minimize the

electricity use of the heat/energy-recovery ventilator, a stand-alone fully ducted installation is recommended. If you choose a simplified installation

that operates your furnace air handler for room-to-room ventilation, an electrically efficient furnace that has an electronically commutated (EC)

variable speed blower motor will minimize your electrical energy consumption and operating cost.

ERV & HRV
Fresh Air Systems
ERVXXSHA1130, ERVXXSVA1130, HRVXXSHA1130, HRVXXSVA1130

ERVXXSHA1150, ERVXXSVA1150, ERVXXSHB1145, ERVXXSVB1145

HRVXXSHA1160, HRVXXSVA1160, HRVXXSHB1160, HRVXXSVB1160

1
2
3
...
»

Содержание ERVXXSHA1130



















Отзывы:

Нет отзывов