Carrier Connect 33CONNECTSTAT43FX, Руководство по установке

Страница: 32 / 70

Using installer settings
Carrier Connect™ Wi -Fi Thermostat 33CONNECTSTAT43FX CARRIER CORPORATION ©2021
Installation Guide All rights reserved
28
To reach the Installer Settings screens, set the mode to OFF and press and hold the MENU button for 5 seconds.
Scrolling though the installer settings:
•
The HOME button returns the installer to the home screen.
•
The UP and DOWN arrows scroll through the settings.
•
The SELECT button allows the installer to change the value of the setting.
•
Press DEFAULT to set the value to the factory default. Press SAVE to store the value.
•
Press SAVE to store the current value and return to the SELECT screen.
•
Press CANCEL to return the setting value to the last saved value and then return to the SELECT screen.
Setting Default/Range
HEAT EQUIP — Set the type of heating equipment being used.
If you set the COMPRESSOR to HP , the heading of this screen is EHEAT EQUIP instead
HEAT EQUIP .
D:
R:
GAS
GAS
ELEC (Electric Heat)
HEAT STAGES
•
If the COMPRESSOR EQUIPMENT TYPE is set to HP , the heading of this screen is
EHEAT STAGES .
•
The option of 0 heat stages is only available if the HEATING EQUIPMENT is set to
electric heat ( ELEC ).
•
If set to 2 , the W2 RELAY OUTPUT is not available for optional functions such as
HUMIDIFIER , DEHUMIDIFICATION , and OCCUPANCY OUTPUT
D:
R:
1
0 to 2
COMPRESSOR
When set to NONE :
•
COOL mode is disabled
•
DEHUMIDIFY setting is not available
•
COOL STAGES setting is not available
•
AUTO ALLOWED setting is not available
When set to HP , the O output is not available for optional functions such as HUMIDIFIER ,
DEHUMIDIFICATION , and OCCUPANCY OUTPUT .
D:
R:
AC
NONE
AC
HP
Using installer settings