Carrier 09VE, Инструкции по установке, эксплуатации и обслуживанию

Страница: 9 / 28

8 - INSTALLATION RECOMMENDATIONS
■ Ensure sufficient devices are provided to guarantee the protection of persons and property, and to enable maintenance operations
to be carried out in complete safety.
■ If a malfunction would have significant human, environmental or financial consequences, take appropriate steps to limit the effects.
■ Ensure that the installation complies with the legal texts and codes in force in the country of operation, and that it complies with the
safety rules applicable to the site where it is being used (explosive atmosphere, for example).
■ If necessary, affix to the machine the hazard symbol corresponding to the fluid in accordance with current standards.
■ Install burn hazard signs wherever the internal temperature of pipes exceeds 65°C.
■ Fit safety devices to prevent the fluid temperature or pressure from exceeding the values indicated in the order. Approval for operation
at higher conditions must be obtained from us.
■ The unit must be fitted with an immediately accessible emergency stop device; this visible device must allow the electrical supply
to the unit and its accessories to be cut completely.
■ Ensure that cutting off the electrical supply, whether intentionally or accidentally, does not jeopardise the process.
■ Use the mounting holes and, if necessary, reinforce the anchoring system according to the wind conditions.
■ If the unit needs to be installed on a framework, this structure must be calculated based on the weight of the unit during operation
(full), equipped with all its accessories.
■ If using rubber mounts, use a rigid frame which locks the feet together.
■ The finned components may be damaged if the unit suffers impacts or is hit by falling objects. Take appropriate steps to protect it,
by adding a protective screen, for example.
■ If there is a risk of freezing while the system is operating, use a device designed to prevent this.
■ Install venting and draining devices and shut-off valves.
■ Connect the piping to earth in accordance with an overall study of the installation.
■ For any accessories, refer to the specific guides.
9