Carrier TRANSICOLD VECTOR 8100, Руководство по эксплуатации и обслуживанию, Страница: 101 / 294

5–3 62-11785
3. The hour meter screen will display with a 15 second timeout. Press the ▲ or ▼ key to scroll through the
available selections. With the desired sub-menu highlighted, press the “=” key to view the data.
4. The number of meters displayed depends on the settings for this unit. Press the BACK key to return to the
HOUR METERS screen or the EXIT key to return to the default screen. Once activity requiring use of Tech-
nician Mode is complete, Technician Mode should be manually canceled, refer to
Figure 5.2 .
5.2.2 Inactive Alarms
There are two sections in the Alarm list: an active alarm section and an inactive alarm section. The APX Control
System can hold up to 16 alarms in the combined lists. The lists can be read via the display screen or using TRU-
Tech. Alarms in these sections are in the order in which the alarms activate and inactivate, respectively. On startup,
all alarms are moved to the inactive list. If an inactive alarm becomes active, the alarm is moved from the inactive
list to the active list.
Each alarm can only be present in either the active or inactive list at any given time. As conditions change, alarms
may be moved from the active list to the inactive list and back.
Alarms are also recorded in the DataLink data recorder. They are recorded at the time they occur (become active),
and the time they become inactive.
Instructions for reading and clearing the Inactive Alarms are provided in
Figure 5.3 . For a complete list of Alarms
and troubleshooting information Refer to Section 9 .
NOTE
The Inactive Alarm List is also called the Technician’s List. Only qualified refrigeration technicians
should access the inactive list. It is not intended for the use of drivers or advanced users.
STANDARD HOUR METERS (1 OF 3)
SWITCH ON HOURS
BACK EXIT
1400 HOURS
TOTAL RUN HOURS
1182 HOURS
LOCK
SCREEN
END OF LIST
OTHER METERS & COUNTERS
BACK EXIT
METER/COUNTER LIST
LOCK
SCREEN
END OF LIST
MAINTENANCE METERS
BACK EXIT
TIME LEFT TO (METER NAME) #####
LOCK
SCREEN
END OF LIST
RESET PM HOUR METERS (1 OF 1)
TIME LEFT TO SWITCH ON HOURS
BACK EXIT
0
RESET
END OF LIST
Number of hours
or cycles
Standby Hours
Switch On Hours
Compressor Hours
As Configured
Standby Protect Hours
Switch On Protect Hours
Switch On Sleep Hours
Compressor Hours
To reset an hour meter, highlight the meter
and press the RESET soft key. In this example,
the Switch On Meter would be reset.
STANDBY HOURS
123 HOURS