background image

 

ULW Czech, s.r.o. 

V Ráji 34, Praha 9 

Hostavice, 198 00, CZ, IČO: 28256212, DIČ: CZ28256212

 

6.3.

 

The Manager app provides additional functionality and is used to download software 
specific for the Device and its updates. Please refer to our web pages for details.  

6.4.

 

It is essential to regularly check the Manager app for updates and new downloads available 
for the Device. These updates might not only enhance functionality, but also remedy known 
issues.  

6.5.

 

The GPSTune app must be installed and running to be able to use GNSS location services.  

7.

 

Charging/Battery Indicator 

7.1.

 

The Device can be charged via 

it’s 

USB-C port, charging pads on the back of the Device and 

M8 connector. 

7.2.

 

The Device will automatically start, when you start charging.  

7.3.

 

Use the provided USB wall charger to charge the Device through the USB port. 

NEVER use 

other brands quick USB chargers (especially quick chargers can damage the USB and 
charging circuitry)

.  

7.4.

 

For charging the Device on a (motor)vehicle, you must use our Carpe Iter Holder 

(“

Holder

”) 

 

- charging version, or M8 charging 

cable with our proprietary power source

. Using any 

other power source will void your warranty. Do NOT replace the connectors between the 
Holder / M8 charging cable and the power source nor otherwise interfere with the wiring. 
Re-wiring the connection between the Holder / M8 charging cable and the power source 
will void your warranty.  

7.5.

 

One power source is included with the charging version of Holder and it will accommodate 
simultaneous charging through the Holder and also through the M8 charging cable or 
charging through the Holder or the M8 charging cable (you can use both or just one of 
those ways). To charge the device through the M8 charging cable without the Holder, the 
Carpe Iter power source can be purchased separately.  

7.6.

 

NEVER charge the Device via USB and M8 charging connector simultaneously. NEVER 
charge the Device via USB and Holder simultaneously. 

7.7.

 

USB-C port must not be used, when the Device is employed on a vehicle, especially not on a 
motorcycle (except when stationary with engine off). The shocks and vibrations the Device 
will receive when riding will damage the USB port.  

7.8.

 

M8 charging connector 

must NOT be connected to a second power source

, when charging 

the Device from both the Holder and M8 charging cable or the Device will be damaged 
(simultaneous charging through both the Holder and the M8 charging cable is only possible 
from one and the same power source).  

7.9.

 

The Device charging capacity is limited to approximately 2A. If too many services are 
running on the Device, the current consumption might exceed the charging capacity, which 
will result in gradual battery level decrease, even when charging. Almost 70% of charging 
capacity is drawn by the LCD when set to full brightness. In case of increased requirements 
on energy consumption reduce LCD brightness.  

7.10.

 

The Device’s charging capacity is 

more than sufficient for casual use (LCD to full brightness, 

GPS on, one actively running navigation application with track recording).  

Содержание Pad v4






















Отзывы: