800 SERIES USER MANUAL
PROGRAMMING
Enable/Disable Tap-to-Activate
LED Display Option
With Tap-to-Activate enabled, a quick triple tap on
the left shoulder or head of the lantern will activate
the LED Display to list the lantern’s status, battery
state of charge & voltage, Flash Character, Effective
Intensity, ALC On/Off, and Calendar On/Off. In some
locations where the lantern may be subject to
extreme movement or jostling, this function may be
disabled to minimize power consumption from
unintentional activation of the LED Display.
To toggle this setting:
1. If you have not already done so,
establish a connection to the lantern.
2. The lantern LEDs will flash to confirm
the lantern is ready to receive
commands.
3. Navigate to the tAP menu.
4. Unlock the existing setting
5. Toggle between “on” and “off”
6. Lock the new setting
7. The lantern LEDs will flash to confirm
that the new setting has been locked.
Viewing Firmware Version
To determine your firmware version:
1. If you have not already done so,
establish a connection to the lantern.
2. The lantern LEDs will flash to confirm
the lantern is ready to receive
commands.
3. Navigate to the info menu. The 4-
digit firmware version will scroll in
from the right.
17
© 2014, Carmanah Technologies Corporation. Revised July 2014. 69928_8XX_UserManual_RevB
