PRELIMINARY RELEASE
*** This is a confidential document. Do not distribute. ***
Figure 18: Carlson Basestation Rear Panel
The rear panel of the Basestation has the following ports:
A.
Heat Sink
B.
Radio Board Ethernet Port*
C.
Mini USB Diagnostic Port (Unused)
D.
RF Port
E.
GPS Antenna Port
F.
Serial Port (Unused)
G.
VGA Port (Unused)
H.
USB Ports (Unused)
I.
Base Controller Board Ethernet Port*
J.
Ethernet Port (Internet in/out)
K.
AC Power
*Base Controller Board and Radio Card Connected via Ethernet Cable
4.2.
CPE (Customer Premise Equipment)
The CPE, also call "Client Station", is installed at the subscriber’s premises. RuralConnect®
CPEs use external antennas that operate over the entire UHF band; from 470 MHz to 698 MHz.
Speak to your Carlson Sales Representative about the antenna selection available.
ses. RuralConnect®
CPEs use external antennas that operate over the entire UHF band; from 470 MHz to 698 MHz.
Speak to your Carlson Sales Representative about the antenna selection available.
Figure 19: Carlson Basestation Ethernet Cable Connections
Figure 20: RuralConnect® CPE
Page | 17
