VMU-C
VMU-C Instruction manual
48
3.2.3
PLANT SETTING
When hovering the mouse over “Setting”, the system will display the two items WIZARD
and SAVE CONFIGURATION .
If the VMU-C configuration has already been completed, clicking on the SAVE
CONFIGURATION item will allow to export it to a file with “DB” extension and to save it
to one's PC, allowing it to be uploaded to the present or different VMU-C at a later time.
Clicking on the WIZARD item will grant access to the page shown below, displaying four
new sub-menus:
Detect Connected Instruments
Manual configuration
Restore Configuration
Import
Plant Configuration Wizard
Clicking on the “
Find Connected Devices
” item will grant access to the page shown in
above; through the “Start Scanning” command, it allows to launch the procedure of “self-
detection” of the modules connected to the auxiliary bus of VMU-C and of the devices
connected to the COM1 communication port (VMU-M and relevant modules).
Note:
before starting the configuration procedure described below, the relevant Mod-
BUS address (Mod-BUS node number) must have been assigned for all the VMU-M
modules. There must not be two devices having the same node number on the same
communication bus.
Note:
the scanning operation can only detect the devices which are properly connected
and powered. The self-detection operation only refers to the COM1 communication
bus. Any devices existing on COM2 shall be configured manually.
VMU-C setting
Содержание VMU-C EM
