How to install an UWP 3.0 system
44
4
Appendix B - Safety recommendations
This section contains important safety related information. If these recommendations are not strictly
followed, serious damage may occur to devices or machinery and serious injury or death may occur to
people. Please read this manual carefully before beginning any installation, maintenance or operational
activity.
Safety recommendations to be followed when installing, operating and maintaining the equipment.
SAFETY RECOMMENDATIONS
The manufacturer denies any kind of direct or
indirect responsibility for consequences resulting
from
the
non-observance
of
the
safety
recommendations and from misuse of the
equipment.
UNAUTHORIZED
PEOPLE MUST NOT
TOUCH
The product contains electrical components
constantly under voltage.
Only skilled personnel correctly trained to operate
on circuits constantly under voltage are allowed to
open the cover of the device.
DO NOT USE WATER TO
PUT OUT FIRE
Water jets or jets of other liquids must not come in
contact with the electric panel
INSTALL AVOIDING
DIRECT EXPOSURE
TO SUNLIGHT
Direct exposure to sunlight may cause overheating
even if the ambient temperature is in the requested
range. Do not install the device near to heat
sources.
DO
NOT
CONNECT
VOLTAGES EXCEEDING
RATED VALUES
Do not connect supply voltages exceeding rated
values to avoid damage to the equipment and
potential risk of injury or death to operators
DO NOT SHORT CIRCUIT
TERMINALS
Do not short circuit terminals (+) and (-) to avoid
damage to the equipment and injury or death to
operators
Содержание UWP 3.0
