DISxRSE Car Park Display
– Configuration manual
34
Enable the display elements
In the
Display configuration
menu, you can configure the appearance and behaviour of the
display elements, for
normal
and
full
parking conditions. See the procedure below:
STEP
ACTION
1
Check the display part number in the
Choose the display type
field.
Note: the available options/combinations depend on the model you are connected to.
2
In the
Choose graphic element
, click on the checkbox to enable/disable.
When an option is selected, the checkbox turns blue.
3
Click on the
Save Configuration
button to save the changes.
Set the display brightness
In the
Settings
tab >
General Settings
menu, you can set the LEDs brightness. See the
procedure below:
Step
Action
1
In the
Brightness
field, select one of the following brightness values:
MAX
Sets the brightness to maximum
MID2
Sets the brightness to middle level 2
MID1
Sets the brightness to middle level 1
MIN
Sets the brightness to minimum
2
Click on the
Save Configuration
button to save the changes.