Car Park 3 – General installation
12
3.2.1 Mounting indications
If you use the vertical sensor SBPSUSL, the maximum height must be 4 m. If the height is greater,
lower the sensor by means of ceiling mounting brackets.
Height and depth
The sensor is higher than the suggested height
Use the SB pipe instead of the SBPBASEB
Mounting position
The sensor is wrongly mounted in the lane
The sensor is properly mounted in the middle of the parking
bay above the car
3.2.2 Further information
The indication provided above are for typical solutions. Please refer to the detailed documentation
for further details and indications also to solve possible issues you encounter during the installation
of base-holders and sensors and possible mounting solutions are suggested.
Document
Where to find it
Data sheet
http://www.productselection.net/PDF/UK/sbpsusl.pdf
Instruction
manual
http://www.productselection.net/MANUALS/UK/sbpsusl_im.pdf
Trouble-
shooting guide
http://www.productselection.net/MANUALS/UK/trouble-shootingguide.pdf
