Car Park 3 – General installation
10
3.1.1 Mounting indications
Mount the SBPBASEA or SBPBASEB correctly, so when you mount the sensor it will point towards
to the parking bay.
For best performance, mount the sensor at a height of 2.4 m at the entrance of the parking bay.
For aesthetic reasons, mount the sensors in a straight line and at the same height.
Height
The sensor is higher than the suggested height.
Use the SB pipe instead of the SBPBASEB
Mounting position
The sensor is too far from the parking bay
Put the sensor as closer as possible to the parking bay
3.1.2 Further information
The indication provided above are for typical solutions.
Please refer to the detailed documentation for further details and indications also to solve possible
issues you encounter during the installation of base-holders and sensors and possible mounting
solutions are suggested.
Document
Where to find it
Data sheet
http://www.productselection.net/PDF/UK/SBPSUSL45.pdf
Instruction manual
http://www.productselection.net/MANUALS/UK/SBPSUSL45_IM.pdf
Trouble-shooting
guide
