Carl Valentin FLEXICODE 53, Руководство по эксплуатации

Страница: 39 / 120

Flexicode Installation and Initial Operation
11.19 Operating Manual 39
5.9 Increase the Clamping Force for Ribbon Roll
NOTICE!
We recommend the use of high-quality transfer ribbon with a
cardboard core. A sample ribbon roll is included in the scope of
delivery. The clamping force of transfer ribbon roll placed on
the rewinding/unwinding unit is designed for this quality.
A
B
C
Figure 17
If other transfer ribbons are used, it can occur that the clamping force
of the spring plates (B) is not sufficient, in order to position the rolls
surely and to protect it against rotating.
When using transfer ribbons with plastic cores a safe positioning of
the roles cannot be ensured.
CAUTION!
Slippage of transfer ribbon roll placed on the rewinding/
unwind unit or the empty cardboard core leads to
malfunctions.

When using transfer ribbon rolls with plastic cores the
groove must be shimmed.
•
Remove the screws (A) and spring plates (B).
•
Insert the shim (C) into the groove. Available from us (52.57.110).
•
Fasten again the spring plates (B) and shims (C) with screws (A).
•
Insert the transfer ribbon roll and empty cardboard core on the
rewinding/unwinding unit.
Check firm position!
Increase the
clamping force