Carl Valentin C220, Инструкция по эксплуатации

Страница: 20 / 44

Replacing Components C220 / C300 / C400
20 Service Instructions 03.22
4.2 Stick the Slide Foil onto the Pad
1
2
2
3
Figure 8
1. Dismount the pad unit (2).
2. Remove the slide foil (1) completely.
3. Clear the surface from remains of glue.
4. Remove covering foil from the slide foil (1).
5. Put the slide foil (1) with its adhesive side onto the pad (2). Press
the slide foil firmly on the pad.
6. Cut off overlapping parts of the slide foil (1) according to the
broken line of the pad (2).
7. Punch the slide foil (1) on the pad (2) using the punch pin (3)
appropriate to the hole pattern on the wearing slide foil.
8. Punch the hole completely by turning the pin.
9. Mount the pad unit (2).