24
6.
If you use a Y-S engine that pressurizes the
tank, you should wrap the tank with nylon strapping
tape to make sure the pressure does not split the
tank. You should also put a couple of pieces across
the cap to make sure it does not blow out.
8.
Install the tank in the fuselage with the cap
aligned in the hole in the firewall. Use foam rubber
(not included) around the tank to hold it in place
7.
Before installing the tank, drill a 1/4” hole in
the firewall for the throttle pushrod to exit. The posi-
tion of the hole will depend on the engine you use.
Align the hole with the throttle arm on your engine.
