8
The higher the pitch, the stronger the light. As soon as you think you have
found the light source, release the button. Then you will hear information
about the color tone, e.g.: „The color of the light is white. Intensity 1000“.
Using this function you can also detect if a light emitting diode on your
phone, your PC etc. is switched on or not. It will also help you recognize
its color tone and intensity. All you need to do is to point the device in the
direction of the light source and hold the light measurement button (B).
While moving the device around or in the vicinity of the light source you
will hear a signal. The higher the pitch of the signal, the closer the device
is to the light source.
As soon as you release the button you will hear information, e.g.: color
tone of the light is red, intensity 256“.
5.4. Comparing colors
This function enables you to compare the color of the last color
measurement with the color measured previously.
Press Color Star‘s measuring sensor onto the object surface that you
would like to analyze and briefly push the color measurement button (A).
After the device has given you the color measurement of this object, hold
the device onto a different surface and briefly press the light measurement
button (B). Listen to the information given by the device: e.g
.: “Colors are
the same”, “Colors are slightly different”, “Colors are appreciable different”
or “Colors are strongly different”.
If only one color measurement has been made, no color comparison is
possible; the information you get will be of this one measurement.
