Carestream HEALTH CS 9000, Руководство пользователя

Страница: 47 / 58

Acquiring a 3D Multi-Volume Image (Stitching) for Adult and Pediatric Patients
CS 9000 and CS 9000 3D User Guide (SM764)_Ed 01 5–17
Launching the X-ray
To launch the X-ray, follow these steps:
1. Leave the X-ray room and close the door. You must keep visual contact with the
patient during acquisition.
2. Trigger the X-ray with the remote control . Press and hold the exposure button until the
end of the first region of interest acquisition. The turns yellow, indicating X-ray
emission. The image appears in the Preview Screen .
When you release the exposure button, the rotative arm is automatically positioned for
the second region of interest acquisition.
IMPORTANT
To stop the acquisition, if there is any problem, release the exposure
button of the remote control or press the red emergency stop button.
NOTE
You can release the patient after acquiring each region of interest. In this
case, you must make sure that the height of the 3D bite block and the
position of the unit rotative arm remains unchanged.