Acquiring a 3D Single-Volume Image for Adult and Pediatric Patients
CS 9000 and CS 9000 3D User Guide (SM764)_Ed 01
5–9
Manually Pre-Setting the Single-Volume Position for Adult
and Pediatric Patients
To pre-set the acquisition parameters, follow these steps:
1. Select the appropriate settings in:
•
The
Program pane
•
The
Patient pane
•
The
Parameter pane
if needed
2. To pre-set the position of the patient positioning, ask the patient to bite into a plate of
dental impression paste and wait for the imprint to harden.
3. Place the dental imprint on the bite block location. Press and hold
to align the
unit rotative arm to the region of interest using the 3D central positioning laser beam.
Press
to save the manually selected parameter settings of the unit rotative arm.
4. Remove the plaster imprint and position the patient in the unit and follow the
appropriate steps to acquire the 3D image of the region of interest.
TIP
You can pre-set the acquisition parameters of the region of interest
manually using dental plaster imprint.
Содержание CS 9000
