manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 96 / 246

Поделиться
Скачать
CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 96

Chapter 3

—

Setting Up the System

86

Pyxis MedStation 4000 System Console User Guide

17. Click 

OK

. You are returned to the New Order Setup dialog box with the Med 

Info tab populated by the information you provided.

18. Click 

Save

. You are returned to the New Patient Setup dialog box with the 

Order Data tab populated by the information you provided.

19. Click the 

Allergies

 tab.

20. In the Allergies box, enter any known allergies (the default messages indicates 

that allergies are not known).

21. Click 

Save

.

22. In the confirmation message, click 

OK

.

Using the expanded allergies feature

The expanded allergies feature allows the console to display full patient allergy 
information from your facility information system. It also can be manually 
entered within the Pyxis MedStation system network. This feature also displays 
multiple reactions and severities associated with a given allergy. 

If multiple allergies with multiple fields are entered, the console sends a message 
to the station. The message alerts your facility’s personnel to check the patient’s 
chart.

1. To manually enter information in the expanded allergies section, go to 

System 

Setup

 > 

Patients

.

2. In the Patients dialog box, you can access the expanded allergies tab when 

adding a patient or editing a patient. Click 

Add

 to add a patient.

or

Highlight a patient’s name and click 

Edit

.

NOTE

Once the expanded allergies feature is enabled, it must stay enabled or the 
system will not synchronize.

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов