manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 79 / 246

Поделиться
Скачать
CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 79

Users

Pyxis MedStation 4000 System Console User Guide

69

Adding a user

This section describes how to add a user. The information for each tab is described 
separately. 

Beginning the process and assigning areas to a user

This section describes how to initiate the addition of a user to the system.

1. Select 

System Setup > Users

.

2. In the Users dialog box, click 

Add

.

The Add New User dialog box appears with the Areas tab selected.

3. In the upper section of the dialog box, complete the following fields:

•

User ID

—Enter a unique user ID (up to 10 characters).

•

First Name

—Enter the user’s first name in this field (up to 20 

characters).

•

Last Name

—Enter the user’s last name in this field (up to 20 characters).

NOTE

When adding a user, you can assign only those privileges that have been 
assigned to you.

NOTE

You can now add unlimited access areas.

NOTE

Although you can enter up to 20 characters in the First Name and Last Name 
fields, the system limits the combined total to 20 characters. The result stored in 
the database might include a truncated version of the first name.

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов