CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 71

Страница: 71 / 246

Combination dose

Pyxis MedStation 4000 System Console User Guide

Editing a combination dose

The following procedure explains how to update a combination dose.

1. Select

System Setup > Formulary Management > Combination Dose

In the Combination Dosage Meds dialog box, select or search for the
combination dose to update and click

Edit

2. In the View/Modify Combo Med dialog box, use the following, as applicable:

•

Add Item

—Add another item to the combination dose.

•

Edit Quantity

—Change the quantity of the selected item.

•

Remove Item

—Remove the item from the combination dose.

3. Click

Save

4. In the confirmation message, click

The Combination Dosage Meds dialog box appears.

Содержание Pyxis MedStation 4000























































































































































































































































Результаты поиска

Содержание Pyxis MedStation 4000

Отзывы:

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 71 / 246

Результаты поиска

Содержание Pyxis MedStation 4000

Отзывы: