
Chapter 3
—
Setting Up the System
22
Pyxis MedStation 4000 System Console User Guide
•
Patient Keep Time
—In hours (1–99) and minutes (0–59), enter the time
to retain a temporary patient record that was manually added at the
station. (Does not apply to permanent patients.)
•
Temp/Activated User
—Enter the number of hours (0 to 99) temporary
users remain active after they created at the station. This feature is used
for users for areas other than their primary areas. To allow time for shift
changes, enter a value that is slightly longer than the longest shift on the
unit.
•
DB Maintenance at
—Checks for expired users and deletes them. Checks
for discharged patients and deletes them.This is set at Site Specific
Options at the Maintenance tab.
•
Pre-Admit Lead Time
—Allows Pyxis MedStation system transactions
for patients that are in the facility’s HIS system before they arrive at the
unit.
4. In the Print Slips For section, select the check boxes for the applicable
options:
•
Remove
—Prints slips when medications are removed.
•
Load/Unload
—Prints slips when medications are loaded or unloaded.
•
Refill
—Prints slips when medications are refilled, select this option.
•
Inventory
—Prints slips when medications are inventoried.
•
Return
—Prints slips when medications are returned.
•
Waste
—Prints slips when medications are wasted.
•
Outdate Removal
—Prints slips when medications are outdated upon
removal.
5. In the Witness Required To section, select the check boxes for the applicable
options:
•
Remove
—Requires a witness for a medication removal.
•
Empty Return Bin
—Requires a witness when the bin is emptied.
6. In the No Witness Required section, select the check boxes for the applicable
options:
•
Return to Stock
—Eliminates the requirement for a witness when a
medication is returned to stock.
•
Return to Bin
—Eliminates the requirement for a witness when a
medication is returned to the Return Bin.
7. In the last section, select the check boxes for the applicable options:
•
Outdating
—Assists with managing the expiration time of the
medications stored in the specified station. Prompts you to enter the
appropriate expiration date for the pocket when refilling the medication.
Later, when you remove the medication, the station then determines
whether the outdate time for the pocket is within the current month. If so,
a message warns you to verify the expiration date on the medication being
administered, because the pocket might contain outdated medications.
During a Refill and Load, the medications being added to the station
Содержание Pyxis MedStation 4000
