manualshive.com logo in svg

CareFusion Pyxis MedStation 4000, Руководство пользователя, Страница: 114 / 246

Поделиться
Скачать
CareFusion Pyxis MedStation 4000 Скачать руководство пользователя страница 114

Chapter 3

—

Setting Up the System

104

Pyxis MedStation 4000 System Console User Guide

8. When the list of responses is complete, click 

Close

.

The Add List Name and Responses dialog box appears with the updated 
responses listed.

9. Click 

Close

.

The Clinical Data Edit dialog box appears with the new Clinical Data List.

10. Click 

OK

 and then click 

Close

.

11. In the Clinical Data dialog box, click 

Close

.

Adding a multiple-response list

For some CDCs, you might find it helpful to define multiple lists of responses. 
You must provide a name for each list and the responses that make up each list.

1. Select 

System Setup > Clinical Data

.

2. In the Clinical Data dialog box, select the CDC name and click 

Edit

.

3. In the Clinical Data Edit dialog box, select 

Multiple

 and click 

Add

.

4. In the Add List Name and Responses dialog box, enter the Name in the List 

section and click 

Save

.

5. Click 

OK

.

6. Click 

Add

 in the Responses section to enter response information.

7. In the Add Response dialog box, enter the applicable responses.

8. Continue to add/save responses as needed. When you are finished, click 

Close

.

The Add List Name and Responses dialog box appears with responses listed.

9. Click 

Close

.

The Clinical Data Edit dialog box appears with the new Clinical Data List.

10. Click 

OK

.

NOTE

If you select a CDC without lists created, you must change the CDC to Single or 
Multiple and click YES in the Categories dialog box that appears. The Add button 
appears on the Clinical Data Edit dialog box. If you select the 

Several

 option 

button, inactive 

Edit

 and 

Delete

 buttons appear next to the 

Add

 button.

Содержание Pyxis MedStation 4000























































































































































































































































Отзывы:

Нет отзывов