CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 52 / 106

Spare Parts Replacement Procedures
P7000, P6000, TIVA, TCI & TIVA 52/106 1000SM00012 Issue 8
Pole Clamp Assembly
This instruction applies to the adjustable pole clamp assembly.
Procedure
1. Ensure that the hinge is fully open (for access to hinge screws).
2. Remove the two pole clamp screws and washers.
3. Remove the two hinge screws and washers. Remove blanking plate.
4. Reassemble in reverse order.
Spare Parts
Item Description Part Number
A PLATE BLANKING POLE CLAMP 1000ME00211
B ASSY POLE CLAMP ADJUSTABLE 7000SP00016
C SPARE POLE CLAMP 40MM 1000SP01015
* ASSY ADJUSTABLE POLE CLAMP QUICK TRANS 7000SP00011
D SCREW M4x16 DIN 7985 ZP+P 0000ME00227
E WASHER M4 SHAKEPROOF 0000ME00286
F CAP END CLAMP ADJUSTABLE 7000ME00052
* item not shown
For information on pole clamp adjustment torque settings, refer to Appendix C, 'Fitting and
Replacement Guidelines'.
(
D/E
) Pole Clamp screws (x4) / Washers (x4)
(
C
) Pole Clamp
(
B
) Hinge
(
A
) Blanking plate
(
F
) Cap (x2)