CareFusion IVAC P6000, Техническое и сервисное руководство

Страница: 47 / 106

Spare Parts Replacement Procedures
P7000, P6000, TIVA, TCI & TIVA 47/106 1000SM00012 Issue 8
PSU, Alarm, Mains Inlet
Procedure
1. Disconnect the grey ribbon cable, the mains inlet connector, the battery connector and the alarm speaker from the
PSU PCB.
2. Remove the two screws which secure the mains inlet to the lower case. Slide out the mains inlet assembly and gasket.
3. Remove the four mounting screws which hold in the PCB and remove the PSU board.
4. Remove the alarm speaker and seal ring from the PSU.
5. Peel off the insulator cover.
6. Reassemble in reverse order.
Spare Parts
Item Description Part Number
A P7 FAMILY POOR SOUNDER MODE KIT 1000SP00235
B SPARE PSU MKII FUNCTIONAL EARTH 6000SP00026
B PSU UPGRADE MKII FUNCTIONAL EARTH 6000SP00021
* LINK FUSE 2A PICOFUSE 0000EL00284
* CONNECTOR PLUG 16 WAY HEADER 0000EL00011
* LINK FUSE 2A PICOFUSE 0000EL00284
* ASSY ALARM TUBE WITH RESISTOR 1000SP01169
C SCREW M3X12 POZI HD Z+C 0000ME00189
D ASSY INSULATOR PSU (P7000 MKII, TCI & TIVA) 6000SP00008
D ASSY INSULATOR PSU P7000 (MKI, P6000, TIVA) 7000SP00005
E GASKET MAINS INLET V4 1000ME01074
F SCREW M3X8 CSK HD POSI SS 0000ME00268
G ASSY MAINS INLET FUNCTIONAL EARTH 6000SP00020
G ASSY MAINS INLET EARTHED (TCI & TIVA) 6000SP00010
* item not shown
(
D
) Insulator cover
(
E
) Gasket
(
A
) Alarm speaker
( C ) PCB Screws (x4)
(
B
) Power Supply Unit (PSU) PCB
(
F
) Mains inlet screws (x2)
(
G
) Mains inlet