CareFusion Alaris 8110 series, Руководство по обслуживанию

Страница: 52 / 172

CORRECTIVE MAINTENANCE
Syringe Module
5A-10
Alaris
®
Syringe Module (8110 Series)
Alaris
®
PCA Module (8120 Series)
Technical Service Manual
5.2.8 Removing Internal Frame Assembly
1. Remove three (
3
) screws attaching
Internal Frame to Front Case Assembly.
2. Remove
IUI
Bracket Strap.
3. Remove one (
1
) screw attaching
IUI
Support Bracket to
IUI
Bracket.
4. Remove
IUI
Support Bracket and
IUI
Bracket.
5. Remove two (
2
) screws attaching
Internal Frame to Drivetrain Assembly.
6. Remove Internal Frame.
During Reassembly:
Route Linear Sensor Harness between
IUI
Bracket and Internal Frame.
5.2 DISASSEMBLY/REASSEMBLY
(Continued)
Drivetrain Assembly
IUI Bracket
Internal Frame
IUI Bracket
Strap
IUI Support Bracket
Front Case Assembly Linear Sensor Harness
To replace an Internal Frame whose Barrel
Clamp Assembly has a park position “pin”
(rather than a “collar”), replace with Front
Case Assembly Kit (Table
7A-1
, item
9
).
CAUTION
-- Barrel Clamp Assembly
(Partial View)
--
Park Position “Collar” Park Position “Pin”