052556-001r1 1
January,
2009
I
NSTALLATION
&
O
PERATION
P
OWER
V
ISOR
P
OWER
S
MART
V
ISOR AND
P
OWER
S
IDE
V
ISOR
The Carefree line of Powervisor products provides many features for the coach
owner.
9
Cuts down heat and glare;
9
Works as a privacy shade while parked;
9
Slim case design;
9
Horizontal mounting brackets provide mounting flexibility and reduced
installation labor;
9
Scissor support arm assembly provides increased rigidity that reduces
curtain movement;
9
Single switch operation;
9
Optional Power Visor remote available (replaces hard-wired switch).
S
PECIFICATIONS
P
OWER
S
MART
V
ISOR
P
OWER
S
IDE
V
ISOR
Available Widths:
30”, 36”, 40”, 43”, 54”
26”, 30”, 36”, 40”, 43”
Maximum Drop:
36” 36”
Color:
Black Black
Fabric:
Black vinyl
Split fabric design:
Top =solid black vinyl
Bottom = solar see through mesh
2 1/8”
2 1/8”
PV3009
2 7/8”
Motor:
10VDC-14VDC
Circuit Protection: 5amp Available in LH or RH Internal Mount
Control:
Single switch operation (optional remote available, remote replaces switch)
I
NSTALLATION
8-32 x 5/16
PFH Screw
Mounting Bracket
#10 x 1 PPH Screw
(2 per bracket)
PV3002
8-32 x 5/16
PFH Screw
Mounting Bracket
#10 x 1 PPH Screw
(2 per bracket)
Captured Nut in
Mounting Slot
Captured Nut in
Mounting Slot
Figure 1. Mounting the Visor.
1. Determine the best orientation to mount the brackets and attach the mounting brackets to the visor
using the supplied 8-32 x 5/16 flat head screws.
2. Position the visor and mark the location of the mounting holes and motor wire.
3. Drill four (4) 1/8" pilot holes for the mounting screws.
4. Drill a 1/4" access hole for the motor wire leads.
5. Lift the visor in position, feed the motor wires through and attach the visor using four (4) #10 x 1 screws.
