background image

070013-301r2 

Printed in USA 

June, 2017 

 

S

ERVICE 

M

ANUAL

 

B

OX 

A

WNING 

LED

RV

 

 

Read this manual before installing or servicing this product.  Failure to follow the 
instructions and safety precautions in this manual can result in personal injury and/or 
cause the product to not operate properly. 

 

S

PECIFICATIONS

 

Mounting 
Options: 

a)  LED light strip is mounted in the roller tube.  The power harness is concealed in the canopy hem. 

b) 

LED light strip is mounted at the awning rail.  Requires special canopy with integrated strip holder

 

Length: 

Available for awnings 10' – 21' 

 

White LED: 

Color LED: 

Power: 

1A, 12Vdc 

2A 12Vdc 

Colors: 

a)  Bright White  6000K (standard) 

RGB (with variable color control) 

b)  Warm White  3000K (OEM option) 

 

Controls: 

a)  Single pole, single throw switch (SR0101) 

IR (infrared) Remote and Controller Kit 
(SR0109) 

b)  Lighted single throw switch (SR0111) 

Note:  For an installer furnished switch, see notes in 
"Switch Installation " on page Error! Bookmark not 
defined.
.

 

Note:  Aftermarket upgrade kits from Carefree use RF remotes and controllers for white and RGB 
installations.  These controls are not interchangeable with the factory installed controls. 

 

T

ABLE OF 

C

ONTENTS

 

Switch and Power Installation ...................................................................................................... 1

 

White LED............................................................................................................................................... 1

 

RGB LED (OEM Option) ......................................................................................................................... 2

 

Awning LED Layouts..................................................................................................................... 3

 

Small Box and Marquee LED Layouts .................................................................................................... 3

 

Big Box LED Layouts .............................................................................................................................. 4

 

Replacing the LED Strip ................................................................................................................ 5

 

Wire Harness Replacement .......................................................................................................... 6

 

LED Components .......................................................................................................................... 7

 

 

 

 

This manual covers LED lighting applications used with box awnings.  For vertical arm awning 
applications, refer to 052584-301 “LED Service Manual for Vertical Arms” available on-line at 
www.carefreeofcolorado.com 

Содержание LED Lighting










Отзывы: