RX
40
13
2.3
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
⚠
CAUTION
Before unpacking the RX40, make sure you have a 2m x 2.5m working area.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1:
Unpacking
Open the box as shown in the figure
below.
L
NOTICE
In order to protect the R40 rowing
machine from damage as long as
possible, you should only remove
the protective packaging when it
is necessary.
Step 2:
Mounting the seat
1. Turn around the aluminum rail
(001).
2. Loosen the four pre-mounted
screws (300) from the seat (45)
with the included tool.
3. Mount the seat (45) on the
aluminum rail (001) with the
previously loosened screws (300)
Содержание CST-RX40
