background image

9

1.3 

Electrical Safety

 

DANGER

 

+

In order to reduce the risk of an electric shock, always unplug the equipment from the 

mains socket immediately after your workout, before assembly or dismantling, and before 

maintenance or cleaning. Do not pull on the cable.

 

WARNING

 

+

Do not leave the equipment unattended while the mains cable is plugged into the mains 

socket. During your absence, the mains cable must be removed from the mains socket to 

prevent improper use by third parties or children.

 

+

 If the mains cable or plug is damaged or defective, contact your contract partner. Until 

repair, the equipment must not be used.

 

ATTENTION

 

+

The equipment requires a mains connection of 220-230 V with 50 Hz mains voltage.

 

+

The equipment may only be connected directly to an earthed socket using the supplied 

mains cable. Extension cables must conform to VDE guidelines. Always completely unwind 

the mains cable.

 

+

 The socket must be protected by a fuse with a minimum fuse rating of "16 A, slow blow".

 

+

 Do not make any changes to the mains cable or the mains plug.

 

+

 Keep the mains cable away from water, heat, oil and sharp edges. Do not route the mains 

cable underneath the equipment or under a carpet or rug, and do not place any objects on 

top of it. 

Содержание CST-BC50















































Отзывы: