xr 600
7
The treadmill is equipped with two self-centering for the belt, but if it tends to move to the sides it is
necessary to act on the left rear screw (see
how to centre the running belt
).
Before connecting the machine to the power supply it must be checked if the power supply characteristics
are in accordance with those indicated on the treadmill’s label (
See 3.7 electric requirement
).
For the safety of operator against the risk of overturning, falling and crushing, the machine must be placed
on a stable surface that supports the weight of the machine without cracking (see 3.9 how to stabilize the
treadmill).
3.5.
Safety parts
Safety parts and devices as:
Emergency red button
magnet-thermic switch with filter up to 20A
do not need any intervention by the user for their calibration but he only must check they are installed and
complete.
The user must also check, when it is possible, their correct functioning.
3.6.
First starting
Everybody can use the machine only after the complete manual reading, following the instructions written
on it. In case of any doubt please contact the constructor, whose address is in the section 1 for the manual.
The user cannot use the machine under the effect of drugs, alcohol or other foodstuffs that can compromise
Содержание XR450R
Страница 1: ...Rev 02 20 06 2017 xr 600 r User Manual...