HF3000-Series Installation Manual
Doc. No. Revision
07-0002 Rev.3
Page
9
of
14
© 2018 Cardinal Health. All Rights Reserved. CARDINAL HEALTH, the Cardinal Health LOGO and ESSENTIAL TO CARE are trademarks or registered
trademarks of Cardinal Health. All other marks are the property of their respective owners.
Step 4
Insert nearest red cable into the red receptacle on the front-right of each shelf. Repeat
steps 3 and 4 for additional shelves.
Step 5
Secure all unused network connectors and excess cables are secured in the cable
chase. Be sure that cables are not twisted or crossed.
Step 6
Replace end covers and secure with the screws. The cabinet is now ready for final
configuration. If cabinet was previously configured the cabinet will resume normal
inventory cycle counting.
8.3 Shelf Removal
Step 1
Stabilize cabinet against a wall or equivalent.
Step 2
Use the allen wrench provided with the cabinet to remove the end corner caps by removing
the four screws from each corner cap. Set corner caps aside in a manner that will prevent
them from falling over.
Step 3
Unplug red cable from shelf to be removed.
Step 3
Slide shelf out and set aside.
