Cardinal Health Alaris 8000 Series, Инструкция по применению, Страница: 26 / 378

1-16
General Setup and Operation
Alaris
®
System Directions for Use
PC Unit Section
System Options (Continued)
1. Press
OPTIONS
key.
2. Press Power Down All Channels soft key.
Power Down All Channels
System Options
Yes
No
Power Down
All Channels?
>Press Yes or No
S
y
stem Options 1 of 2
>Select an Option or
EXIT
PAGE
DOWN
EXIT
Displa
y
Contrast
Time of Da
y
Power Down All Channels
Anesthesia Mode
Patient ID
3. Press Yes soft key.
• During power off sequence, Main Display flashes
POWERING DOWN
.
Anesthesia Mode
When the Anesthesia Mode is enabled while a module is
paused, the module remains in an indefinite pause until
restarted.
When Anesthesia Mode is enabled:
• All limits are set to Soft .
• Dose checking mode is set to Smart .
• Key-press audio is turned off.
• Tamper Resist Mode (panel locked) is not available.
• All Guardrails
®
Drug entries are available for selection.
When the Alaris
®
System is set up
for use in Anesthesia Mode, it is
important to select the profile that
corresponds with the care area the
patient will be taken to when the
Anesthesia Mode is discontinued.
This ensures that the Alaris
®
System
will be in the correct profile following
the use of the Anesthesia Mode.
CAUTION
-- Continued Next Page --