Cardiac Science POWERHEART G3 PRO 9300P, Краткое руководство пользователя

Страница: 33 / 36

Powerheart® AED G3 Pro 9300P 70-00969-01 F
3-13
ECG Monitoring Mode
At the discretion EMS personnel, the AED can be used for ongoing
ECG patient monitoring. By using a separately sold ECG Patient
Monitoring Kit (5111), the AED provides non-diagnostic ECG display
of the patient’s heart rhythm for attended patient monitoring. It is not
necessary to turn the device off prior to connecting the ECG cable.
While connected to the AED, the shock capability is disabled.
Indications for use: A conscious or breathing patient, regardless of age.
Contra-indications: No known contra-indications.
The separately sold ECG Patient Monitoring Kit is designed for
connection to ECG electrodes per AAMI or IEC color convention and
is required to use this feature. Once connected the AED displays and
evaluates the patient’s ECG (Lead II). Follow all prompts from the
AED.
The kit includes a cable that contains electronics (with a non-
replaceable battery) that is inserted into the electrode socket on the
AED; the other end of the cable has three patient lead wires. Each lead
wire terminates in an ECG electrode connector to attach to a
disposable ECG electrode.
To install ECG monitoring electrodes:
1. Remove packaging from kit components. Connect the ECG
electrodes to the colored lead wires.
2. Peel off the adhesive backing from the ECG electrodes. Apply the
ECG electrodes to the patient’s bare chest accordingly:
•
RA/R Electrode: Place near the right midclavicular line,
directly below the clavicle.
•
LA/L Electrode: Place near the left midclavicular line,
directly below the clavicle.
•
LL/F Electrode: Place between the 6th and 7th
intercostals space on the left midclavicular line.
Note: Make sure there is adequate space between the
defibrillation electrodes of at least 1 inch or 2.54 cm (if previously
applied) and the ECG monitoring electrodes.
ECG Monitoring Mode