Cardiac Science Burdick 8300 Скачать руководство пользователя страница 5

Страница: 5 / 48

70-01047-01 B

Warnings and cautions

Warnings and cautions

Safety alert descriptions

These safety statements may be used in this manual:

DANGER!

This alert identifies hazards that will cause serious personal injury
or death.

WARNING!

This alert identifies hazards that may cause serious personal injury
or death.

Caution

This alert identifies hazards that may cause minor personal injury,
product damage, or property damage.

General warnings and cautions

This section lists general warnings and cautions. Those
pertaining to specific functions and procedures are included in
the text where appropriate.

WARNING! Shock hazard

Do not touch the ECG device or patient during defibrillation.
Otherwise, serious injury or death could result.

WARNING! Burn hazard

Severe burns may result from improper placement of defibrillator
paddles. Never position defibrillator paddles close to or over ECG
electrodes. Remove all chest electrodes (V-Leads/ C-Leads) from
the patient before defibrillation.

Read and follow all defibrillator instructions before attempting
defibrillation.

Содержание Burdick 8300

















































Результаты поиска

Содержание Burdick 8300

Отзывы:

Похожие инструкции для Burdick 8300

Бренды по названию

Популярные бренды

Cardiac Science Burdick 8300, Инструкция по безопасности продукта

Результаты поиска

Содержание Burdick 8300

Отзывы:

Похожие инструкции для Burdick 8300

Бренды по названию

Популярные бренды