7
d. Lever off star washer from inboard end of
spindle with screwdriver (Figure 5).
NOTE:
On later doors remove circlip.
e. Pull door slightly away from frame and
remove spindle. Unhook from cable.
N.B.
On some installations difficulty may
be experienced in removing spindle pin
because of restricted side room. In extreme
circumstances door may have to be taken out.
f.
Loop cable over new spindle, ensuring
loop is located in groove (Figure 6).
g. Refit spindle through hole in bracket.
h. Push new star washer, correct way round,
onto spindle using pliers (or suitable size
pipe if available) ensuring there is no free
play on spindle (Figure 6).
DO NOT REPLACE RUNNER
i.
Remove retaining pin by reversing step b.
•
Figure 5
Cable in
groove
Fit new
starlock
washer
•
Figure 6
Remove top
fixing screw
•
Figure 4
IMPORTANT NOTE:
On CD PRO doors fitted with “floating” wheel
spindles you MUST fit nylon spacer to LH spindle to eliminate end float
(see instructions in item 15).